WA 80 Our power pack.

Altendorf WA 80

Fascinating performance

The WA 80 enables you to successfully take on any material challenge: no matter whether you are working with wood or plastic. With its well thought-out design and robust build quality, it makes light work of simple but precise squaring cuts through complex angles. Completely developed and assembled in Germany, the machine sets a new benchmark for sliding table saws in terms of price and quality. It will guarantee the success of your business.

This is what makes the WA 80 so special

An overview of the key features.

Control panel on the machine frame

You can control the height and tilt adjustment of the main saw blade at the press of a button. The tilt angle is shown on the digital display.

Rip fence with precise manual adjustment

Setting the fence is easy; the precise adjustment facilitates great accuracy. The rip fence drops down clear of the machine table level to free up extra space for dividing large panels.

Crosscut fence with fixed 90° angle

Stops to 3,200 mm

The crosscut fence with fixed 90° angle earns its keep every day by helping with precision cuts on workpieces of different lengths and formats. The fence can be easily slid from front to back without lifting. Adjustment using graduated scale.

Sliding table

Table length 3,000 mm

The large dumbbell rollers guide the moving table with absolute precision between the hard-chromed guide bars. Robust though it is, the table responds even to a light touch, gliding smoothly and securely as if it were on rails. And it retains this ease of movement even after decades of hard work, dust and dirt.

Uniquely reliable

Roll up your sleeves and get to work. The WA 80 is always ready.

Individually configurable

Design your machinery with your exact needs in mind.

Tough, low-maintenance machines

We guarantee that your production operation will run smoothly and your cost estimation will hit the mark.

Guaranteed value stability

An Altendorf is always an investment in the future.

The WA 80 – as multifaceted as your projects

  • Aluminium
  • Solid wood
  • Plastic
  • Panel processing

Aluminium

The job of cutting and sawing aluminium requires extreme precision. Altendorf sliding table saws have proven themselves for years in the aluminium-processing industry. As the perfect tool for cutting and sawing aluminium, WA 80 does the job with extraordinary precision and can be used individually. With the help of this machine, you can cleanly cut aluminium with sharp contours and to within a tenth of a millimetre.

Solid wood

The variety of grains lends a very special look to solid-wood furniture. The furniture is robust and stable. It also offers a degree of high quality that you can feel. The trimming, ripping and refinement of wood and boards create a different challenge. Discover our feature options that are specially designed for the processing of solid wood, features that turn the job into child’s play.

Plastic

WA 80 cuts all commercially available plastics in any desired form. The machine can easily handle even complex composite materials like carbon composite plates – and it can cut them to within a tenth of a millimetre! Learn more now about plastics processing with Altendorf.

Panel processing

Panel processing is a job that creates new challenges for carpenters and cabinet-makers day in and day out. Commercially available half-size panels are usually too large and, in the worst case, require two people to handle them. Added to this are scrap panels that could possibly be used for one thing or another at some point in the future. Before long, a pile of scrap wood has formed, and no one can find what he or she needs in it. The features offered by our WA 80 will make your panel-processing work even easier.

Specifications

  • Basic configuration
  • Configuration options
  • Dimensions

Control panel on the machine frame

All functions are easily accessed on the control panel on the machine frame. You can control the rise/fall and tilt of the main saw blade at the touch of a button. The tilt angle is shown on the digital display.

Saw blade projection

The saw blade projection of the WA 80 is 150 mm (saw blade diameter 450 mm).

Rip fence with precise manual adjustment

Cutting width 1,000 mm

Setting the fence is easy; the precise adjustment facilitates great accuracy. The rip fence drops down clear of the machine table level to free up extra space for dividing large panels.

Crosscut fence with fixed 90° angle

Stops to 3,200 mm

The crosscut fence with fixed 90° angle earns its keep every day by helping with precision cuts on workpieces of different lengths and formats. The fence can be easily slid from front to back without lifting. Adjustment using graduated scale.

Sliding table

Table length 3,000 mm

The large dumbbell rollers guide the moving table with absolute precision between the hard-chromed guide bars. Robust though it is, the table responds even to a light touch, gliding smoothly and securely as if it were on rails. And it retains this ease of movement even after decades of hard work, dust and dirt.

Motor rating

4 kW (5.5 HP) with single speed (4,000 rpm)

Powerful and smooth-running The saw is a powerhouse produced with the latest manufacturing technology. The saw shaft runs incredibly smoothly because it is electronically balanced as a fully assembled unit and extensive use is made of cast components. The high-precision vertical movement of the unit is linear with maintenance-free guide bearings. The robust tilt quadrants incorporate the traditional Altendorf tongue and groove connection system, which allows the whole unit to tilt easily and precisely to exactly the correct angle.

Sliding table

Table length:
  • Table length 2250 mm
  • Table length 3200 mm
  • Table length 3400 mm
  • Table length 3800 mm, with ground support
  • Table length 4300 mm, with ground support
Accessories:
  • On/off switch on the double trolley

Drive power and speed

  • 5.5 kW (7.5 HP) with 3 speeds, 3/4/5000 rpm, manually adjustable
    • Special voltage for 5.5 kW (7.5 hp), 3 speeds, 3/4/5000 rpm
  • 7.5 kW (10 HP) with 3 speeds, 3/4/5000 rpm, manually adjustable

Scoring units and accessories

  • Scoring unit with electromotive height and manual side adjustment
  • RAPIDO-scoring system, adjustment range: 3 – 3.8 mm, ø = 120 mm
  • LED lighting on the scoring unit

Parallel stops

with manual adjustment:
  • Cutting width 800 mm, incl. fine adjustment, adjustable via scale
  • Cutting width 1300 mm, incl. Fine adjustment, adjustable via scale
with DIGIT X:
  • Cutting width 800 mm, manual adjustment with digital display, incl. fine adjustment
  • Cutting width 1000 mm, manual adjustment with digital display, incl. fine adjustment
  • Cutting width 1300 mm, manual adjustment with digital display, incl. fine adjustment

Angle stops

with DIGIT L:
  • Lengths up to 3200 mm, length can be adjusted via digital display with fine adjustment
Angle mitre stop:
  • Lengths of up to 3500 mm, manual angle adjustment by 49°, with length compensation
  • with DIGIT L, lengths up to 3200 mm, length can be adjusted via digital display, angle dimension with length compensation adjustable via scale
  • with DIGIT LD, lengths up to 3200 mm, length and angle can be adjusted via digital display, with integrated length compensation
Parallelogram Cross Slide (PQS):
  • with digital angle display, lengths up to 3500 mm, manual adjustment, angle adjustment by 47° with digital display, length and angle measurement with length compensation, adjustable via scale, 2 individual tilt stops included
  • with DIGIT LD, lengths up to 3200 mm, convertible stop, length and angle adjustable via digital display, with integrated length compensation, 2 individual tilt stops, fine adjustment, batteries and charging cable included
Accessories:

Cross slide extension for angle stop / angle mitre stop, extendable to 650 mm

Mitre stops

One-sided:
  • Lengths up to 2500 mm
Double-sided:
  • DUPLEX, lengths up to 1350 mm, adjustable via analogue angle and length scale with magnifying glass
  • DUPLEX, lengths up to 2150 mm, adjustable via analogue angle and length scale with magnifying glass
  • DUPLEX D, lengths up to 1350 mm, adjustable via digital angle display and analogue length scale, with length compensation
  • DUPLEX DD, lengths up to 1350 mm, adjustable via digital length and angle display, with length compensation

Other accessories

  • PALIN/parallel cutting device, adjustable via scale
  • JETTY, second edition on the double trolley
  • Front support roller
  • Hold-down device, manual, clamping height up to 200 mm
  • Additional cross slide with double bottom support roller

A – Trolley length + 290 mm

B – Trolley length + 360 mm

C – Angle stop, lengths up to 2500 mm: 1500 – max. 2630 mm

C – Angle stop, lengths up to 3200 mm: 1890 – max. 3420 mm

C – Angle mitre stop, lengths up to 3500 mm: 1960 – max. 3690 mm

D – Cutting width + 310 mm

Machine Weight – from 1000 kg

Working table height – 910 mm

Your contact partner

  • Your contact

We are there for you and look forward to your call. Also feel free to use our callback service.

Order directly online – to speed things up

Are you looking for the right replacement part for your machinery? It will certainly be available in our huge warehouses.

Swing arm roller set

Protection hood

Rapido Scoring system

Housing Digit L

Double roller

Stop profile parallel stop

We are here for you

To topi