Receive a 10% OFF voucher for your next spare parts order when you register your Altendorf or Hebrock machine. Register now

We know what matters. Your performance NEW: Hebrock F Series & K Series next

Hebrock edge banding machines – the next generation

The F and K series – Faster. More efficient. More flexible. More comfortable.

It has more. It can do more.

A big leap forward: Our F Series and K Series have reached the next stage of their evolution. Various improvements and new product features now let you work even faster, more efficiently and more comfortably. But that is not all: With the K 34, we welcome a new member to the family of Hebrock edge banding machines. Meet your new performance enhancer!

The new F Series: For the finest edge in the craft

Higher feed rates and even more precise processing of workpieces, simpler, more convenient and ergonomic operation, more economical energy consumption – the next generation of the F 2, F 4 and F 5 leaves nothing to be desired. The high demands of every woodworking company are met more than ever by the Hebrock edgebanding machines of the F series.

Discover the F Series machines

The key innovations at a glance

Our customers are always at the center of our attention, whether that’s during servicing or related to the development of our Hebrock edge banding machines. We always have an open ear to what you need. The new F Series is the result.

Enlarged 15” touchscreen

The 15-inch touchscreen with high-resolution 3D graphics replaces the previous ten-inch monitor. This way, you have all the units in view and can set different parameters.

10 m/min feed rate

The feed rate is now ten meters (32 feet) per minute. You benefit from the increased manufacturing efficiency. The LED tracking lamp helps with the inserting of the workpiece.

Higher hood

The machine column now 100 mm higher simplifies removing the interchangeable bowl system and makes the handling even more ergonomic.

New machine design

Clear industrial design in compact upright construction and torsion-resistant frame.

And what do you get out of it?

The main advantages of the new F Series next

Fast work

Produce higher quantities in the same time? The new F Series of the Hebrock edge banding machines makes it happen. Thanks to sophisticated technology, we were able to raise the feed rate to ten meters (32 feet) per minute. The LED workpiece tracking lamp at the machine infeed also helps visually when laying out workpieces.

Short heat-up time

Hebrock edgebanders are precision tools. With them, your work is easier – and faster. For this reason, we also took a closer look at how long it took to heat the glue pot and reduced it. Three minutes and thirty seconds – that’s how quickly you’ll be ready to go with the new F Series.

Lower energy use

For sustainability and lower costs, low energy requirements are particularly important. If the machine [optional edge banding machine] is not in use for more than 15 minutes, it enters standby mode and also switches off the heating of the glue pot.

It has more. It can do more.

Faster. More efficient. More flexible. More comfortable.

The new K Series: A new power

Joiners have long relied on the K 36 or K 37 edge banding machines from Hebrock. The popular K Series has now been updated. To satisfy the various needs of edgebander users, Hebrock has also launched the K 34, which is an extension of its renowned K series.

Discover the models of the K Series

The key innovations at a glance

The new K Series is the result of our research and development work. We know what our customers want – and deliver it consistently.

Enlarged 15” touchscreen

The 15-inch touchscreen with high-resolution 3D graphics replaces the previous ten-inch monitor. This way, you have all the units in view and can set different parameters.

15 m/min feed rate

The feed rate is now fifteen meters (49 feet) per minute. You benefit from the increased manufacturing efficiency. The LED tracking lamp helps with the insertion of the workpiece

New Double cross-cut saw

The newly developed double cross-cut saw with linear guide lets you approach and machine workpieces with a minimum length of 140 millimeters (5.5 inches).

Revised milling stations

We have given the milling stations a facelift. The new design saves space, which, in turn, simplifies your work to adjust the unit.

And what do you get out of it?

The main advantages of the new K Series next

Fast work

Produce higher quantities in the same time? The new F Series of the Hebrock edge banding machines makes it happen. Thanks to sophisticated technology, we were able to raise the feed rate to fifteen meters (49 feet) per minute. The LED workpiece tracking lamp at the machine infeed also helps visually when laying out workpieces.

Short heat-up time

Hebrock edgebanders are precision tools. With them, your work is easier – and faster. For this reason, we also took a closer look at how long it took to heat the glue pot and reduced it. Three minutes and thirty seconds – that’s how quickly you’ll be ready to go with the new K Series.

Lower energy use

For sustainability and lower costs, low energy requirements are particularly important. If the machine is not in use for more than 15 minutes, it enters standby mode and also switches off the heating of the glue pot.

Your contact

If you would like to know more about Hebrock Edgebanding machines we would be pleased to hear from you.
Simply fill in the contact form and we will get back to you as soon as possible.
Further information can be found in the data protection provisions.
To topi