Register your Hebrock edgebanding machine and unlock the full potential of your Altendorf product. Register now

Hebrock Edgebanding machines


Our Complete Solution

This model impresses across the board.

Smaller size, same performance.

The space-saving F 4 measures just 4 metres long. However, it is ideal for producing fully machined edges. It comes optimally equipped, even in its standard version. It will surprise you with its jointing technology, corner processing and flat scraper. An optional radius scraper is available for finishing off edges. And there’s plenty more. The integrated interchangeable glue pot (colour change) even allows PUR processing. Set your sights on this diverse model!


Main Features

Technical Features
  • Feed speed 10 m/min
  • Higher cover
  • Greater ease of use
  • Optional radius cutter
  • Optional cleaning station
  • Integrated adhesive changing device
  • Compact frame design

  • Interchangeable glue pot can be heated in 3.5 mins
  • 3D graphic symbols
  • WhisperCut with interchangeable DIA tools
  • Adhesive/colour change
  • Flat scraper including dual keying

  • 15“ LED touchscreen
  • Easy-to-read display with integrated 3D feature
  • Revolving and tilting control system
  • USB interface
  • Meter and running time counter
  • Resistant to dust

Made for the highest demands.

The main features of the F 4

Pre-milling cutter (WhisperCut)

The WhisperCut jointing system with interchangeable diamond cutting points ensures maximum tool life (manual height adjustment) and tear-free milling results due to an oblique cut through the centre of the panel. Two ready-to-use cutter heads guarantee tear-free milling results, even for demanding materials and surfaces.

By simply swapping the diamond cutting points, this significantly reduces sharpening costs and downtime and no changes to the basic machine settings are required unlike with classic tools. The lightweight aluminium design protects the motors and enhances smooth operation.

The milling depth can be manually adjusted up to 2.0 mm so that you can work to the final dimensions when cutting.

Change over quick heating pot

  • Ready for operation in just 3.5 minutes
  • Standard interchangeable glue pots with stop function for rapid change of colour or technology (EVA/PUR)
  • Tool-free change of glue pot
  • Simplified cleaning of glue pot in a matter of minutes
  • Teflon coating for effortless cleaning

Pressure zone

These 3 spring-loaded pressure rollers apply optimum pressure to the banded edges. Adhesive residue or dirt can be easily removed thanks to their coating.

Trim saw station

The stable design of the single-motor cross-cut saw with linear guides enables precise sawing of the front and rear workpieces. Simply choose the setting via the touchscreen display on the front of the machine.

Milling station

This combination milling unit allows you to choose between the different machining procedures: Radius / 10° chamfer and flush milling (combination version). The standard setting is conveniently selected via the display on the front of the machine.

The optional 3-point adjustment allows even more flexible processing for different requirements. Changes are instant and reduce downtime to a minimum.

Cleaning agent spraying unit

This spray system applies the cleaning agent to the top and bottom of the workpiece. By applying the cleaning agent, this removes both the separating agent already applied and any impurities or adhesive residue on the panel surface.

Surface scraper

Dynamically stored flat scraper ensures high production quality even for difficult materials. The wide contact surface precisely and gently scans the edge material to ensure consistent quality and removes adhesive residue and excess edges.

More Features

By applying the separating agent to the top and bottom of the workpiece, this prevents any excess adhesive residue from sticking to the workpiece Prior to edging, the spray system casts a fine layer of separating agent over the top and bottom of the workpiece edges. This prevents any excess adhesive from sticking to the workpiece. This option is recommended if regularly working with PUR adhesives.

The lubricant is sprayed onto the edge surface via an additional fine nozzle to prevent damage to sensitive edges or the removal of film due to sensing rollers and sensing shoes.

By upgrading the milling to 3-point adjustment, the radius, chamfer and flush milling (combination blade) can be selected via the display. As a result, protective covers remain closed and this minimises set-up time.

Corner rounding optimally prepares you for any challenge when it comes to dealing with the front of the turning heads. Thanks to intelligent programming via the touchscreen display, individual sides and processing settings can be set.

Whether it’s the front and/or rear edge, radius or chamfer settings or choosing between an entire side or only the vertical edge, there are no limits here. The optional, interchangeable motor combined with our quick-change preliminary setup provides a rapid solution when dealing with different edge thicknesses.

This AC motor optimally prepares your machine for ABS and thin edges.
Tools can be effortlessly changed and the finish improved. No manual reworking required (quick-change preliminary setup required).

Fully focussed.


You can intuitively set up your machine via the 15” touchscreen on the front and view all key information at a glance. The 40 channels allow you to store, modify and repeat individual settings. The 3D feature provides a visual representation of the front and back of your final workpiece. You can clearly record key parameters such as workpiece quantity, linear metre and duration and assign them to your commissions.

Plain text notifications inform you of the current status of your machine, which simplifies the maintenance process.


This energy-saving mode is an automatic standby mode that disables all systems. If a workpiece is not fed into the machine for a longer period of time (15 minutes), the machine, including heating of the glue pot system, will automatically switch off. The machine consumes almost no energy.

Dynamically stored flat scraper ensures high production quality even for difficult materials. The wide contact surface precisely and gently scans the edge material to ensure consistent quality and removes adhesive residue and excess edges.

Interior machine lighting for clear setup and maintenance of your machine.

The two polishing discs free the upper and lower panel from excess sprays, adhesive residue and lighten in the event of edge stress whitening. 2 x 0.18 kW motors, individually adjustable for consistent cleaning results when using various processing technologies.

The warp-resistant machine base unit allows precise working for years to come.
Whether mass production of small parts or half-size panels, we guarantee a consistent finish each time you work. A well-thought-out extraction system, which requires just one central connection point to your extraction system, allows mostly mobile use of your HEBROCK edge banding machine even in small workshops. All inlet and outlets are found on the machine so that it can be moved as needed using our optional trolley for space-consuming work.

Allows working with tool sharpening and pinhole drilling with a milling unit and radius scraper. The settings can be easily changed via the display on the front of the machine. Scanning of the workpieces takes place underneath the panel.


Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von Vimeo.
Mehr erfahren

Video laden


  • Manual adjustment of edge and pre-milling thickness
  • SPS control (including 15” touchscreen)
  • Glue application to the workpiece for edge material up to 3 mm
  • Support plate for the edge material
  • Visual display for workpiece sequence using LEDs at machine inlet
  • Pre-milling cutter (including DIA tool) up to 2 mm jointing cutter depth with interchangeable blade design (WhisperCut)
  • Overhead changeable glue pot with Teflon coating and glue-changing device
  • Trim saw for precise processing of front and rear edge workpiece
  • Corner rounding unit
  • Surface scraper with dual-tracing
  • Conveyor chain with screw-fixed special chain plates
  • Double roller overhead pressure system (ball-bearing mounted)
  • Workpiece support (folds out to front)
  • Viewing window on the rear of the machine
  • Feed speed approx. 10 m/min
  • HF milling station with pneumatic milling adjustment and combi-blade system (radius/chamfer/flush)
  • 3-Punkt-Verstellung
  • Fahrwerk
  • Schnellwechselvorrichtung für Eckenfräse
  • Zus. Eckenfräsmotor (mit Werkzeugbestückung) (zus. Sonderausstattung notwendig)
  • Multi-Radiusziehklinge (zus. Sonderausstattung notwendig)
  • Sprühsysteme
  • Radius profile scraper
  • Nesting
  • Fügen bis 50 mm Werkstückhöhe
  • Zusätzliches Wechselbecken
  • PUR-Box
  • Zusätzliche Rollenbahn
  • Cleaning station
Max. pre-milling thickness 2 mm
Max. edge thickness 3 mm
Min/max workpiece thickness 8 – 50 mm
Min. workpiece width 80 mm
Min. workpiece length 180 mm
Feed speed approx. 10 m/min.
Ready for operation approx. 3,5 min.
Max. power consumption Ø approx. 7,4 kW
Electrical connection 400 V – 3 Ph – 50 Hz
Machine dimensions (LxWxH) approx. 4050 x 1450 x 1500 mm
Work table height 850 mm
Extraction socket Ø 1 x 140 mm
Weight approx. 840 kg


Intelligent accessory for better support during your daily work. Almost always upgradable independent of the machine.

  • Additional glue pot
  • Pre-milling up to 50 mm workpiece thickness
  • Air cushion table
  • Additional roller bar
  • PUR Box

The F 4 – as diverse as your projects.

Plenty of scope for your requirements.

HEBROCK edge banding machines are the right choice for just about every type of wood. No matter whether it’s solid wood, chipboard, blockboards, MDF or multiplex, you can always expect precise, clean edge processing (including finishing).

HEBROCK edge banding machines are the right choice for just about every type of wood. No matter whether it’s solid wood, chipboard, blockboards, MDF or multiplex, you can always expect precise, clean edge processing (including finishing).

Edge banding of plastics, such as PP sandwich panels, is a key part of the craft.
With HEBROCK edge banding machines, you can enjoy productivity and flexibility as you work. At the same time, you’ll always offer top quality for your customers.

Experience our Hebrock F 4 live!

Visit us at our headquarters in Minden, Westphalia, and experience not only the new F and K Series Next also many other machines configured for you. We would be happy to show you and explain the advantages to you in a personal meeting.

Arrange an appointment

This is what the finest craftsmanship looks like.


Top-quality craftsmanship can be seen in the details.

Clean edges are a key quality feature. These high-quality workpieces were produced with plenty of passion, great skill, and an edge banding machine from HEBROCK. Enjoy this small selection of works from our top performers in the F-SERIES!

Your Contact Partner

We are here to assist you and look forward to your call.

Altendorf Service contact

Send e-mail

Edgebanding machines – Hebrock delivers on its promises

Successful entrepreneurs have good ideas, work efficiently and make good decisions. If you want to impress your customers now and in the future, you should place your trust in edge banding machines from Hebrock.

Edgebanding machines

Success Stories: Our customers know what counts.

Our products are used in many workshops and facilities. Here, our customers share their experiences and tell why our machines are so important to their daily workflow.

Success stories
To topi