This model impresses across the board
Smaller size, same performance
The space-saving F 4 measures just 4 metres long. However, it is ideal for producing fully machined edges. It comes optimally equipped, even in its standard version. It will surprise you with its jointing technology, corner processing and flat scraper. An optional radius scraper is available for finishing off edges. And there’s plenty more. The integrated interchangeable glue pot (colour change) even allows PUR processing. Set your sights on this diverse model!
Main Features
Technical Features
- Feed speed 10 m/min
- Higher cover
- Greater ease of use
- Optional radius cutter
- Optional cleaning station
- Integrated adhesive changing device
- Compact frame design
Benefits
- Interchangeable glue pot can be heated in 3.5 mins
- 3D graphic symbols
- WhisperCut with interchangeable DIA tools
- Adhesive/colour change
- Flat scraper including dual keying
Software/Control
- 15“ LED touchscreen
- Easy-to-read display with integrated 3D feature
- Revolving and tilting control system
- USB interface
- Meter and running time counter
- Resistant to dust
Made for the highest demands
The main features of the F 4
Pre-milling cutter (WhisperCut)
The WhisperCut jointing system with interchangeable diamond cutting points ensures maximum tool life (manual height adjustment) and tear-free milling results due to an oblique cut through the centre of the panel. Two ready-to-use cutter heads guarantee tear-free milling results, even for demanding materials and surfaces.
By simply swapping the diamond cutting points, this significantly reduces sharpening costs and downtime and no changes to the basic machine settings are required unlike with classic tools. The lightweight aluminium design protects the motors and enhances smooth operation.
The milling depth can be manually adjusted up to 2.0 mm so that you can work to the final dimensions when cutting.
Change over quick heating pot
- Ready for operation in just 3.5 minutes
- Standard interchangeable glue pots with stop function for rapid change of colour or technology (EVA/PUR)
- Tool-free change of glue pot
- Simplified cleaning of glue pot in a matter of minutes
- Teflon coating for effortless cleaning
Pressure zone
These 3 spring-loaded pressure rollers apply optimum pressure to the banded edges. Adhesive residue or dirt can be easily removed thanks to their coating.
Trim saw station
The stable design of the single-motor cross-cut saw with linear guides enables precise sawing of the front and rear workpieces. Simply choose the setting via the touchscreen display on the front of the machine.
Milling station
This combination milling unit allows you to choose between the different machining procedures: Radius / 10° chamfer and flush milling (combination version). The standard setting is conveniently selected via the display on the front of the machine.
The optional 3-point adjustment allows even more flexible processing for different requirements. Changes are instant and reduce downtime to a minimum.
Cleaning agent spraying unit
This spray system applies the cleaning agent to the top and bottom of the workpiece. By applying the cleaning agent, this removes both the separating agent already applied and any impurities or adhesive residue on the panel surface.
Surface scraper
Dynamically stored flat scraper ensures high production quality even for difficult materials. The wide contact surface precisely and gently scans the edge material to ensure consistent quality and removes adhesive residue and excess edges.
More Features
Release agent spraying unit
By applying the separating agent to the top and bottom of the workpiece, this prevents any excess adhesive residue from sticking to the workpiece Prior to edging, the spray system casts a fine layer of separating agent over the top and bottom of the workpiece edges. This prevents any excess adhesive from sticking to the workpiece. This option is recommended if regularly working with PUR adhesives.
Protection spraying unit
The lubricant is sprayed onto the edge surface via an additional fine nozzle to prevent damage to sensitive edges or the removal of film due to sensing rollers and sensing shoes.
Pneumatic 3-point adjustment
By upgrading the milling to 3-point adjustment, the radius, chamfer and flush milling (combination blade) can be selected via the display. As a result, protective covers remain closed and this minimises set-up time.
Corner rounding unit
Corner rounding optimally prepares you for any challenge when it comes to dealing with the front of the turning heads. Thanks to intelligent programming via the touchscreen display, individual sides and processing settings can be set.
Whether it’s the front and/or rear edge, radius or chamfer settings or choosing between an entire side or only the vertical edge, there are no limits here. The optional, interchangeable motor combined with our quick-change preliminary setup provides a rapid solution when dealing with different edge thicknesses.
Additional change motor for corner rounding
This AC motor optimally prepares your machine for ABS and thin edges.
Tools can be effortlessly changed and the finish improved. No manual reworking required (quick-change preliminary setup required).
Surface scraper
Dynamically stored flat scraper ensures high production quality even for difficult materials. The wide contact surface precisely and gently scans the edge material to ensure consistent quality and removes adhesive residue and excess edges.
Indoor LED illumination
Interior machine lighting for clear setup and maintenance of your machine.
Cleaning station
The two polishing discs free the upper and lower panel from excess sprays, adhesive residue and lighten in the event of edge stress whitening. 2 x 0.18 kW motors, individually adjustable for consistent cleaning results when using various processing technologies.
Wheels Visuell
The warp-resistant machine base unit allows precise working for years to come.
Whether mass production of small parts or half-size panels, we guarantee a consistent finish each time you work. A well-thought-out extraction system, which requires just one central connection point to your extraction system, allows mostly mobile use of your HEBROCK edge banding machine even in small workshops. All inlet and outlets are found on the machine so that it can be moved as needed using our optional trolley for space-consuming work.
Nesting for milling station and radius scraper
Allows working with tool sharpening and pinhole drilling with a milling unit and radius scraper. The settings can be easily changed via the display on the front of the machine. Scanning of the workpieces takes place underneath the panel.
Specifications
Basic Features
|
|
Optional Features
|
|
Technical Details
| Max. pre-milling thickness | 2 mm |
| Max. edge thickness | 3 mm |
| Min/max workpiece thickness | 8 – 50 mm |
| Min. workpiece width | 80 mm |
| Min. workpiece length | 180 mm |
| Feed speed | approx. 10 m/min. |
| Ready for operation | approx. 3,5 min. |
| Max. power consumption | Ø approx. 7,4 kW |
| Electrical connection | 400 V – 3 Ph – 50 Hz |
| Machine dimensions (LxWxH) | approx. 4050 x 1450 x 1500 mm |
| Work table height | 850 mm |
| Extraction socket | Ø 1 x 140 mm |
| Weight | approx. 840 kg |
Accessories
Intelligent accessory for better support during your daily work. Almost always upgradable independent of the machine.
- Additional glue pot
- Pre-milling up to 50 mm workpiece thickness
- Air cushion table
- Additional roller bar
- PUR Box
The F 4 – as diverse as your projects
Plenty of scope for your requirements
Wood
HEBROCK edge banding machines are the right choice for just about every type of wood. No matter whether it’s solid wood, chipboard, blockboards, MDF or multiplex, you can always expect precise, clean edge processing (including finishing).
Wood-like (HPL panels)
HEBROCK edge banding machines are the right choice for just about every type of wood. No matter whether it’s solid wood, chipboard, blockboards, MDF or multiplex, you can always expect precise, clean edge processing (including finishing).
Plastic
Edge banding of plastics, such as PP sandwich panels, is a key part of the craft.
With HEBROCK edge banding machines, you can enjoy productivity and flexibility as you work. At the same time, you’ll always offer top quality for your customers.
This is what the finest craftsmanship looks like
Top-quality craftsmanship can be seen in the details.
Clean edges are a key quality feature. These high-quality workpieces were produced with plenty of passion, great skill, and an edge banding machine from HEBROCK. Enjoy this small selection of works from our top performers in the F-SERIES!
Contact us
Would you like to find out more, do you have specific questions or need advice on our machines? We will advise you individually – simply contact our experts.
The service and spare parts service for Hebrock customers
Machine maintenance
Maximize the service life of your machine with a regular check-up. Wear parts are replaced, basic settings are checked. Trust the experienced Altendorf service technicians.
Spare parts service
Are you looking for the right spare part for your machine? It is guaranteed to be available in our large warehouses.
On site service
Our experienced service technicians will look at your defective sliding machine directly at your site and help you as promptly as possible.
Hebrock Downloads
Here you will find brochures, operating instructions and data sheets. All brochures and documents are available online – and just a few clicks away from download.
Your best service – Simple. Faster. Always.
myALTENDORFGROUP – is your new service app! It can do almost everything and is incredibly easy to use. An innovative tool that makes your work easier.
myALTENDORFGROUP
Success Stories: Our customers know what counts.
Our products are used in many workshops and facilities. Here, our customers share their experiences and tell why our machines are so important to their daily workflow.
Success Stories